Import 2.3.18pre1

[davej-history.git] / drivers / net / 3c501.c

/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */
/*
 Written 1992,1993,1994 Donald Becker

 Copyright 1993 United States Government as represented by the
 Director, National Security Agency. This software may be used and
 distributed according to the terms of the GNU Public License,
 incorporated herein by reference.

 This is a device driver for the 3Com Etherlink 3c501.
 Do not purchase this card, even as a joke. It's performance is horrible,
 and it breaks in many ways.

 The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
 Center of Excellence in Space Data and Information Sciences
 Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771

 Fixed (again!) the missing interrupt locking on TX/RX shifting.
 Alan Cox <Alan.Cox@linux.org>

 Removed calls to init_etherdev since they are no longer needed, and
 cleaned up modularization just a bit. The driver still allows only
 the default address for cards when loaded as a module, but that's
 really less braindead than anyone using a 3c501 board. :)
 19950208 (invid@msen.com)

 Added traps for interrupts hitting the window as we clear and TX load
 the board. Now getting 150K/second FTP with a 3c501 card. Still playing
 with a TX-TX optimisation to see if we can touch 180-200K/second as seems
 theoretically maximum.
 19950402 Alan Cox <Alan.Cox@linux.org>

 Some notes on this thing if you have to hack it. [Alan]

 1] Some documentation is available from 3Com. Due to the boards age
 standard responses when you ask for this will range from 'be serious'
 to 'give it to a museum'. The documentation is incomplete and mostly
 of historical interest anyway.

 2] The basic system is a single buffer which can be used to receive or
 transmit a packet. A third command mode exists when you are setting
 things up.

 3] If it's transmitting it's not receiving and vice versa. In fact the
 time to get the board back into useful state after an operation is
 quite large.

 4] The driver works by keeping the board in receive mode waiting for a
 packet to arrive. When one arrives it is copied out of the buffer
 and delivered to the kernel. The card is reloaded and off we go.

 5] When transmitting dev->tbusy is set and the card is reset (from
 receive mode) [possibly losing a packet just received] to command
 mode. A packet is loaded and transmit mode triggered. The interrupt
 handler runs different code for transmit interrupts and can handle
 returning to receive mode or retransmissions (yes you have to help
 out with those too).

 Problems:
 There are a wide variety of undocumented error returns from the card
 and you basically have to kick the board and pray if they turn up. Most
 only occur under extreme load or if you do something the board doesn't
 like (eg touching a register at the wrong time).

 The driver is less efficient than it could be. It switches through
 receive mode even if more transmits are queued. If this worries you buy
 a real Ethernet card.

 The combination of slow receive restart and no real multicast
 filter makes the board unusable with a kernel compiled for IP
 multicasting in a real multicast environment. That's down to the board,
 but even with no multicast programs running a multicast IP kernel is
 in group 224.0.0.1 and you will therefore be listening to all multicasts.
 One nv conference running over that Ethernet and you can give up.

*/

static const char*version =
"3c501.c: 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov).\n";

/*
 * Braindamage remaining:
 * The 3c501 board.
 */

#include <linux/module.h>

#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/fcntl.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/malloc.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/config.h>/* for CONFIG_IP_MULTICAST */
#include <linux/spinlock.h>

#include <asm/bitops.h>
#include <asm/io.h>

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>

/* A zero-terminated list of I/O addresses to be probed.
 The 3c501 can be at many locations, but here are the popular ones. */
static unsigned int netcard_portlist[] __initdata = {
0x280,0x300,0
};

\f
/*
 * Index to functions.
 */

intel1_probe(struct net_device *dev);
static intel1_probe1(struct net_device *dev,int ioaddr);
static intel_open(struct net_device *dev);
static intel_start_xmit(struct sk_buff *skb,struct net_device *dev);
static voidel_interrupt(int irq,void*dev_id,struct pt_regs *regs);
static voidel_receive(struct net_device *dev);
static voidel_reset(struct net_device *dev);
static intel1_close(struct net_device *dev);
static struct net_device_stats *el1_get_stats(struct net_device *dev);
static voidset_multicast_list(struct net_device *dev);

#define EL1_IO_EXTENT 16

#ifndef EL_DEBUG
#define EL_DEBUG 0/* use 0 for production, 1 for devel., >2 for debug */
#endif/* Anything above 5 is wordy death! */
static int el_debug = EL_DEBUG;

/*
 * Board-specific info in dev->priv.
 */

struct net_local
{
struct net_device_stats stats;
int tx_pkt_start;/* The length of the current Tx packet. */
int collisions;/* Tx collisions this packet */
int loading;/* Spot buffer load collisions */
 spinlock_t lock;/* Serializing lock */
};

\f
#define RX_STATUS (ioaddr + 0x06)
#define RX_CMD RX_STATUS
#define TX_STATUS (ioaddr + 0x07)
#define TX_CMD TX_STATUS
#define GP_LOW (ioaddr + 0x08)
#define GP_HIGH (ioaddr + 0x09)
#define RX_BUF_CLR (ioaddr + 0x0A)
#define RX_LOW (ioaddr + 0x0A)
#define RX_HIGH (ioaddr + 0x0B)
#define SAPROM (ioaddr + 0x0C)
#define AX_STATUS (ioaddr + 0x0E)
#define AX_CMD AX_STATUS
#define DATAPORT (ioaddr + 0x0F)
#define TX_RDY 0x08/* In TX_STATUS */

#define EL1_DATAPTR 0x08
#define EL1_RXPTR 0x0A
#define EL1_SAPROM 0x0C
#define EL1_DATAPORT 0x0f

/*
 * Writes to the ax command register.
 */

#define AX_OFF 0x00/* Irq off, buffer access on */
#define AX_SYS 0x40/* Load the buffer */
#define AX_XMIT 0x44/* Transmit a packet */
#define AX_RX 0x48/* Receive a packet */
#define AX_LOOP 0x0C/* Loopback mode */
#define AX_RESET 0x80

/*
 * Normal receive mode written to RX_STATUS. We must intr on short packets
 * to avoid bogus rx lockups.
 */

#define RX_NORM 0xA8/* 0x68 == all addrs, 0xA8 only to me. */
#define RX_PROM 0x68/* Senior Prom, uhmm promiscuous mode. */
#define RX_MULT 0xE8/* Accept multicast packets. */
#define TX_NORM 0x0A/* Interrupt on everything that might hang the chip */

/*
 * TX_STATUS register.
 */

#define TX_COLLISION 0x02
#define TX_16COLLISIONS 0x04
#define TX_READY 0x08

#define RX_RUNT 0x08
#define RX_MISSED 0x01/* Missed a packet due to 3c501 braindamage. */
#define RX_GOOD 0x30/* Good packet 0x20, or simple overflow 0x10. */
\f

/*
 * The boilerplate probe code.
 */

#ifdef HAVE_DEVLIST
struct netdev_entry el1_drv = {"3c501", el1_probe1, EL1_IO_EXTENT, netcard_portlist};
#else

int __init el1_probe(struct net_device *dev)
{
int i;
int base_addr = dev ? dev->base_addr :0;

if(base_addr >0x1ff)/* Check a single specified location. */
returnel1_probe1(dev, base_addr);
else if(base_addr !=0)/* Don't probe at all. */
return ENXIO;

for(i =0; netcard_portlist[i]; i++)
{
int ioaddr = netcard_portlist[i];
if(check_region(ioaddr, EL1_IO_EXTENT))
continue;
if(el1_probe1(dev, ioaddr) ==0)
return0;
}

return ENODEV;
}
#endif

/*
 * The actual probe.
 */

static int __init el1_probe1(struct net_device *dev,int ioaddr)
{
struct net_local *lp;
const char*mname;/* Vendor name */
unsigned char station_addr[6];
int autoirq =0;
int i;

/*
 * Read the station address PROM data from the special port.
 */

for(i =0; i <6; i++)
{
outw(i, ioaddr + EL1_DATAPTR);
 station_addr[i] =inb(ioaddr + EL1_SAPROM);
}
/*
 * Check the first three octets of the S.A. for 3Com's prefix, or
 * for the Sager NP943 prefix.
 */

if(station_addr[0] ==0x02&& station_addr[1] ==0x60
&& station_addr[2] ==0x8c)
{
 mname ="3c501";
}else if(station_addr[0] ==0x00&& station_addr[1] ==0x80
&& station_addr[2] ==0xC8)
{
 mname ="NP943";
}
else
return ENODEV;

/*
 * Grab the region so we can find the another board if autoIRQ fails.
 */

request_region(ioaddr, EL1_IO_EXTENT,"3c501");

/*
 * We auto-IRQ by shutting off the interrupt line and letting it float
 * high.
 */

if(dev->irq <2)
{
autoirq_setup(2);
inb(RX_STATUS);/* Clear pending interrupts. */
inb(TX_STATUS);
outb(AX_LOOP +1, AX_CMD);

outb(0x00, AX_CMD);

 autoirq =autoirq_report(1);

if(autoirq ==0)
{
printk("%s probe at %#x failed to detect IRQ line.\n",
 mname, ioaddr);
return EAGAIN;
}
}

outb(AX_RESET+AX_LOOP, AX_CMD);/* Loopback mode. */
 dev->base_addr = ioaddr;
memcpy(dev->dev_addr, station_addr, ETH_ALEN);

if(dev->mem_start &0xf)
 el_debug = dev->mem_start &0x7;
if(autoirq)
 dev->irq = autoirq;

printk("%s: %s EtherLink at %#lx, using %sIRQ %d.\n", dev->name, mname, dev->base_addr,
 autoirq ?"auto":"assigned ", dev->irq);

#ifdef CONFIG_IP_MULTICAST
printk("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
#endif

if(el_debug)
printk("%s", version);

/*
 * Initialize the device structure.
 */

 dev->priv =kmalloc(sizeof(struct net_local), GFP_KERNEL);
if(dev->priv == NULL)
return-ENOMEM;
memset(dev->priv,0,sizeof(struct net_local));

 lp=dev->priv;
spin_lock_init(&lp->lock);

/*
 * The EL1-specific entries in the device structure.
 */

 dev->open = &el_open;
 dev->hard_start_xmit = &el_start_xmit;
 dev->stop = &el1_close;
 dev->get_stats = &el1_get_stats;
 dev->set_multicast_list = &set_multicast_list;

/*
 * Setup the generic properties
 */

ether_setup(dev);

return0;
}

/*
 * Open/initialize the board.
 */

static intel_open(struct net_device *dev)
{
int ioaddr = dev->base_addr;

if(el_debug >2)
printk("%s: Doing el_open()...", dev->name);

if(request_irq(dev->irq, &el_interrupt,0,"3c501", dev))
return-EAGAIN;

el_reset(dev);

 dev->start =1;

outb(AX_RX, AX_CMD);/* Aux control, irq and receive enabled */
 MOD_INC_USE_COUNT;
return0;
}

static intel_start_xmit(struct sk_buff *skb,struct net_device *dev)
{
struct net_local *lp = (struct net_local *)dev->priv;
int ioaddr = dev->base_addr;
unsigned long flags;

if(dev->interrupt)/* May be unloading, don't stamp on */
return1;/* the packet buffer this time */

if(dev->tbusy)
{
if(jiffies - dev->trans_start <20)
{
if(el_debug >2)
printk(" transmitter busy, deferred.\n");
return1;
}
if(el_debug)
printk("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
 dev->name,inb(TX_STATUS),inb(AX_STATUS),inb(RX_STATUS));
 lp->stats.tx_errors++;
outb(TX_NORM, TX_CMD);
outb(RX_NORM, RX_CMD);
outb(AX_OFF, AX_CMD);/* Just trigger a false interrupt. */
outb(AX_RX, AX_CMD);/* Aux control, irq and receive enabled */
 dev->tbusy =0;
 dev->trans_start = jiffies;
}

/*
 * Avoid incoming interrupts between us flipping tbusy and flipping
 * mode as the driver assumes tbusy is a faithful indicator of card
 * state
 */

spin_lock_irqsave(&lp->lock, flags);

/*
 * Avoid timer-based retransmission conflicts.
 */

if(test_and_set_bit(0, (void*)&dev->tbusy) !=0)
{
spin_unlock_irqrestore(&lp->lock, flags);
printk(KERN_WARNING "%s: Transmitter access conflict.\n", dev->name);
}
else
{
int gp_start =0x800- (ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN);
unsigned char*buf = skb->data;

load_it_again_sam:
 lp->tx_pkt_start = gp_start;
 lp->collisions =0;

 lp->stats.tx_bytes += skb->len;

/*
 * Command mode with status cleared should [in theory]
 * mean no more interrupts can be pending on the card.
 */

outb_p(AX_SYS, AX_CMD);
inb_p(RX_STATUS);
inb_p(TX_STATUS);

 lp->loading=1;

/*
 * Turn interrupts back on while we spend a pleasant afternoon
 * loading bytes into the board
 */

spin_unlock_irqrestore(&lp->lock, flags);

outw(0x00, RX_BUF_CLR);/* Set rx packet area to 0. */
outw(gp_start, GP_LOW);/* aim - packet will be loaded into buffer start */
outsb(DATAPORT,buf,skb->len);/* load buffer (usual thing each byte increments the pointer) */
outw(gp_start, GP_LOW);/* the board reuses the same register */

if(lp->loading==2)/* A receive upset our load, despite our best efforts */
{
if(el_debug>2)
printk("%s: burped during tx load.\n", dev->name);
spin_lock_irqsave(&lp->lock, flags);
goto load_it_again_sam;/* Sigh... */
}
outb(AX_XMIT, AX_CMD);/* fire ... Trigger xmit. */
 lp->loading=0;
 dev->trans_start = jiffies;
}

if(el_debug >2)
printk(" queued xmit.\n");
dev_kfree_skb(skb);
return0;
}
\f

/*
 * The typical workload of the driver:
 * Handle the ether interface interrupts.
 */

static voidel_interrupt(int irq,void*dev_id,struct pt_regs *regs)
{
struct net_device *dev = dev_id;
struct net_local *lp;
int ioaddr;
int axsr;/* Aux. status reg. */

if(dev == NULL || dev->irq != irq)
{
printk(KERN_ERR "3c501 driver: irq %d for unknown device.\n", irq);
return;
}

 ioaddr = dev->base_addr;
 lp = (struct net_local *)dev->priv;

spin_lock(&lp->lock);

/*
 * What happened ?
 */

 axsr =inb(AX_STATUS);

/*
 * Log it
 */

if(el_debug >3)
printk(KERN_DEBUG "%s: el_interrupt() aux=%#02x", dev->name, axsr);
if(dev->interrupt)
printk(KERN_WARNING "%s: Reentering the interrupt driver!\n", dev->name);
 dev->interrupt =1;
if(lp->loading==1&& !dev->tbusy)
printk(KERN_WARNING "%s: Inconsistent state loading while not in tx\n",
 dev->name);

if(dev->tbusy)
{

/*
 * Board in transmit mode. May be loading. If we are
 * loading we shouldn't have got this.
 */

int txsr =inb(TX_STATUS);

if(lp->loading==1)
{
if(el_debug >2)
{
printk(KERN_DEBUG "%s: Interrupt while loading [", dev->name);
printk(" txsr=%02x gp=%04x rp=%04x]\n", txsr,inw(GP_LOW),inw(RX_LOW));
}
 lp->loading=2;/* Force a reload */
 dev->interrupt =0;
spin_unlock(&lp->lock);
return;
}

if(el_debug >6)
printk(KERN_DEBUG " txsr=%02x gp=%04x rp=%04x", txsr,inw(GP_LOW),inw(RX_LOW));

if((axsr &0x80) && (txsr & TX_READY) ==0)
{
/*
 * FIXME: is there a logic to whether to keep on trying or
 * reset immediately ?
 */
if(el_debug>1)
printk("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x"
" gp=%03x rp=%03x.\n", dev->name, txsr, axsr,
inw(ioaddr + EL1_DATAPTR),inw(ioaddr + EL1_RXPTR));
 dev->tbusy =0;
mark_bh(NET_BH);
}
else if(txsr & TX_16COLLISIONS)
{
/*
 * Timed out
 */
if(el_debug)
printk("%s: Transmit failed 16 times, Ethernet jammed?\n",dev->name);
outb(AX_SYS, AX_CMD);
 lp->stats.tx_aborted_errors++;
}
else if(txsr & TX_COLLISION)
{
/*
 * Retrigger xmit.
 */

if(el_debug >6)
printk(" retransmitting after a collision.\n");
/*
 * Poor little chip can't reset its own start pointer
 */

outb(AX_SYS, AX_CMD);
outw(lp->tx_pkt_start, GP_LOW);
outb(AX_XMIT, AX_CMD);
 lp->stats.collisions++;
 dev->interrupt =0;
spin_unlock(&lp->lock);
return;
}
else
{
/*
 * It worked.. we will now fall through and receive
 */
 lp->stats.tx_packets++;
if(el_debug >6)
printk(" Tx succeeded %s\n",
(txsr & TX_RDY) ?".":"but tx is busy!");
/*
 * This is safe the interrupt is atomic WRT itself.
 */

 dev->tbusy =0;
mark_bh(NET_BH);/* In case more to transmit */
}
}
else
{
/*
 * In receive mode.
 */

int rxsr =inb(RX_STATUS);
if(el_debug >5)
printk(" rxsr=%02x txsr=%02x rp=%04x", rxsr,inb(TX_STATUS),inw(RX_LOW));
/*
 * Just reading rx_status fixes most errors.
 */
if(rxsr & RX_MISSED)
 lp->stats.rx_missed_errors++;
else if(rxsr & RX_RUNT)
{/* Handled to avoid board lock-up. */
 lp->stats.rx_length_errors++;
if(el_debug >5)
printk(" runt.\n");
}
else if(rxsr & RX_GOOD)
{
/*
 * Receive worked.
 */
el_receive(dev);
}
else
{
/*
 * Nothing? Something is broken!
 */
if(el_debug >2)
printk("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
 dev->name, rxsr);
el_reset(dev);
}
if(el_debug >3)
printk(".\n");
}

/*
 * Move into receive mode
 */

outb(AX_RX, AX_CMD);
outw(0x00, RX_BUF_CLR);
inb(RX_STATUS);/* Be certain that interrupts are cleared. */
inb(TX_STATUS);
 dev->interrupt =0;
spin_unlock(&lp->lock);
return;
}


/*
 * We have a good packet. Well, not really "good", just mostly not broken.
 * We must check everything to see if it is good.
 */

static voidel_receive(struct net_device *dev)
{
struct net_local *lp = (struct net_local *)dev->priv;
int ioaddr = dev->base_addr;
int pkt_len;
struct sk_buff *skb;

 pkt_len =inw(RX_LOW);

if(el_debug >4)
printk(" el_receive %d.\n", pkt_len);

if((pkt_len <60) || (pkt_len >1536))
{
if(el_debug)
printk("%s: bogus packet, length=%d\n", dev->name, pkt_len);
 lp->stats.rx_over_errors++;
return;
}

/*
 * Command mode so we can empty the buffer
 */

outb(AX_SYS, AX_CMD);
 skb =dev_alloc_skb(pkt_len+2);

/*
 * Start of frame
 */

outw(0x00, GP_LOW);
if(skb == NULL)
{
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
 lp->stats.rx_dropped++;
return;
}
else
{
skb_reserve(skb,2);/* Force 16 byte alignment */
 skb->dev = dev;
/*
 * The read increments through the bytes. The interrupt
 * handler will fix the pointer when it returns to
 * receive mode.
 */
insb(DATAPORT,skb_put(skb,pkt_len), pkt_len);
 skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
 lp->stats.rx_packets++;
 lp->stats.rx_bytes+=pkt_len;
}
return;
}

static voidel_reset(struct net_device *dev)
{
int ioaddr = dev->base_addr;

if(el_debug>2)
printk("3c501 reset...");
outb(AX_RESET, AX_CMD);/* Reset the chip */
outb(AX_LOOP, AX_CMD);/* Aux control, irq and loopback enabled */
{
int i;
for(i =0; i <6; i++)/* Set the station address. */
outb(dev->dev_addr[i], ioaddr + i);
}

outw(0, RX_BUF_CLR);/* Set rx packet area to 0. */
cli();/* Avoid glitch on writes to CMD regs */
outb(TX_NORM, TX_CMD);/* tx irq on done, collision */
outb(RX_NORM, RX_CMD);/* Set Rx commands. */
inb(RX_STATUS);/* Clear status. */
inb(TX_STATUS);
 dev->interrupt =0;
 dev->tbusy =0;
sti();
}

static intel1_close(struct net_device *dev)
{
int ioaddr = dev->base_addr;

if(el_debug >2)
printk("%s: Shutting down Ethernet card at %#x.\n", dev->name, ioaddr);

 dev->tbusy =1;
 dev->start =0;

/*
 * Free and disable the IRQ.
 */

free_irq(dev->irq, dev);
outb(AX_RESET, AX_CMD);/* Reset the chip */

 MOD_DEC_USE_COUNT;
return0;
}

static struct net_device_stats *el1_get_stats(struct net_device *dev)
{
struct net_local *lp = (struct net_local *)dev->priv;
return&lp->stats;
}

/*
 * Set or clear the multicast filter for this adaptor.
 * best-effort filtering.
 */

static voidset_multicast_list(struct net_device *dev)
{
int ioaddr = dev->base_addr;

if(dev->flags&IFF_PROMISC)
{
outb(RX_PROM, RX_CMD);
inb(RX_STATUS);
}
else if(dev->mc_list || dev->flags&IFF_ALLMULTI)
{
outb(RX_MULT, RX_CMD);/* Multicast or all multicast is the same */
inb(RX_STATUS);/* Clear status. */
}
else
{
outb(RX_NORM, RX_CMD);
inb(RX_STATUS);
}
}

#ifdef MODULE

static char devicename[9] = {0, };

static struct net_device dev_3c501 =
{
 devicename,/* device name is inserted by linux/drivers/net/net_init.c */
0,0,0,0,
0x280,5,
0,0,0, NULL, el1_probe
};

static int io=0x280;
static int irq=5;
MODULE_PARM(io,"i");
MODULE_PARM(irq,"i");

intinit_module(void)
{
 dev_3c501.irq=irq;
 dev_3c501.base_addr=io;
if(register_netdev(&dev_3c501) !=0)
return-EIO;
return0;
}

voidcleanup_module(void)
{
/*
 * No need to check MOD_IN_USE, as sys_delete_module() checks.
 */

unregister_netdev(&dev_3c501);

/*
 * Free up the private structure, or leak memory :-)
 */

kfree(dev_3c501.priv);
 dev_3c501.priv = NULL;/* gets re-allocated by el1_probe1 */

/*
 * If we don't do this, we can't re-insmod it later.
 */
release_region(dev_3c501.base_addr, EL1_IO_EXTENT);
}

#endif/* MODULE */
\f
/*
 * Local variables:
 * compile-command: "gcc -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer -m486 -c -o 3c501.o 3c501.c"
 * kept-new-versions: 5
 * End:
 */