r-code.Rmd

# R code {#r-code}

Everyone has their own coding style and formats. There are however some best
practice guidelines that [_Bioconductor_ reviewers][reviewer-list] will look for.

<iclass="fab fa-r-project"></i> can be a robust, fast and efficient programming
language but often some coding practices result in less than ideal use of
resources.


This section will review some key points, suggestions, and best practices that
will aid in the package review process and assist in making code more
robust and efficient.


## License {#rcode-license}

Only contain code that can be distributed under the license specified (see also
[The DESCRIPTION file](#description-license)).

## R Code Development

### Re-use of functionality, classes, and generics {#rcode-reuse}

Avoid re-implementing functionality or classes (see also
[The DESCRIPTION file](description.html#depends-imports-suggests-enhances)).
Make use of appropriate existing packages (e.g.,
`r BiocStyle::Biocpkg("biomaRt")`,
`r BiocStyle::Biocpkg("AnnotationDbi")`,
`r BiocStyle::Biocpkg("Biostrings")`,
`r BiocStyle::Biocpkg("GenomicRanges")`) and classes (e.g.,
`r BiocStyle::Biocpkg("SummarizedExperiment")`,
`r BiocStyle::Biocpkg("Biobase")`::AnnotatedDataFrame,
`r BiocStyle::Biocpkg("GenomicRanges")`::GRanges,
`r BiocStyle::Biocpkg("Biostrings")`::DNAStringSet) to avoid duplication of functionality
available in other [_Bioconductor_][] packages. See
also [Common Bioconductor Methods and Classes][bioc-common].

This encourages interoperability and simplifies your own package development.
If a new representation is needed, see [class development section](#class-development).
In general, [_Bioconductor_][] will insist on interoperability with [Common
Classes](#commonclass) for acceptance.

Developers should make an effort to re-use generics that fit the generic
contract for the proposed class-method pair i.e., the behavior of the method
aligns with the originally proposed behavior of the generic. Specifically,
the behavior can be one where the return value is of the same class across
methods. The method behavior can also be a performant conceptual transformation
or procedure across classes as described by the generic.
`r BiocStyle::Biocpkg("BiocGenerics")` lists commonly used generics in
Bioconductor. One example of a generic and method implementation is that of the
`rowSums` generic and the corresponding method within the
`r BiocStyle::Biocpkg("DelayedArray")` package. This generic contract returns a
numeric vector of the same length as the rows and is adhered to across classes
including the `DelayedMatrix` class. Re-using generics reduces the amount of
new generics by consolidating existing operations and avoids the mistake of
introducing a "new" generic with the same name. Note that in order to re-use
a generic, the behavior of the method should align with the originally
proposed behavior of the generic. Avoid creating generics from existing `base`
or `utils` functions as this can lead to confusion and conflicts with
existing functions and generics. Generic name collisions may mask previous
definitions in ways that are hard to debug and diagnose. We recommend the use of
`r BiocStyle::CRANpkg("conflicted")` to identify namespace collisions.

If there are problems, e.g., in performance or parsing your particular
file type, ask for input from other developers on the
[bioc-devel][bioc-devel-mail] mailing list. Common disadvantages to
'implementing your own' are the introduction of non-standard data
representations (e.g., neglecting to translate coordinate systems of file
formats to Bioconductor objects) and user bewilderment. Therefore, in such case,
we recommend to use standard file format classes inheriting from
`r BiocStyle::Biocpkg("BiocIO")`'s `BiocFile` class in packages such as
`r BiocStyle::Biocpkg("rtracklayer")` and `r BiocStyle::Biocpkg("BiocIO")`.

### Naming of packages, functions, and classes {#naming-functions}

See section on [package naming](#package-name). The concepts there should also
apply to function names, class names, etc.

Avoid names that:

- Are easily confused with existing package names, function names, class names.
- Imply a temporal (e.g. `ExistingPackage2`) or qualitative
 (e.g. `ExistingPackagePlus`) relationship.
- Suggest hate speech, slurs or profanity, either implicitly or explicitly.
- Invoke or refer to any historical, ethical, or political contexts.
- Reference well known people, characters, brands, places or icons.


### Methods development {#rcode-method-development}

We encourage maintainers to only create new methods for classes exported within
their packages. We discourage the generation of methods for external classes,
i.e., classes outside of the package [`NAMESPACE`](#namespace). This can
potentially cause method name collisions (i.e., where two methods defined on
the same object but in different packages) and pollute the methods environment
for those external classes. New methods for established classes can also cause
confusion among users given that the new method and class definition are in
separate packages.

### File names {#rcode-file-names}

* Filename extension for R code should be '.R'. Use the prefix
 'methods-' for S4 class methods, e.g., 'methods-coverage.R'. Generic
 definitions can be listed in a single file, 'AllGenerics.R', and
 class definitions in 'AllClasses.R'.
* Filename extension for man pages should be '.Rd'.


### Class development {#class-development}

Remember to **re-use**[common _Bioconductor_ methods and classes][bioc-common]
before implementing new representations. This encourages
interoperability and simplifies your own package development.

#### Class Names {#class-names}

Use CamelCaps: initial upper case, then alternate case between words.

#### Class design {#class-design}

_Bioconductor_ prefers the use of S4 classes over S3 class. Please use the S4
representation for designing new classes. Again, we can not emphasize enough to
reuse existing class structure if at all possible. If an existing class
structure is not sufficient, it is also encouraged to look at extending or
containing an [existing _Bioconductor_ class](#commonclass).

If your data requires a new representation or function, carefully
design an S4 class or generic so that other package developers with
similar needs will be able to re-use your hard work, and so that users
of related packages will be able to seamlessly use your data
structures. Do not hesitate to ask on the Bioc-devel mailing list for
advice.

For any class you define, implement and use a 'constructor' for object
creation. A constructor is usually plain-old-function (rather than,
e.g., a generic with methods). It provides documented and
user-friendly arguments, while allowing for developer-friendly
implementation. Use the constructor throughout your own code,
examples, and vignette.

Implement a `show()` method to effectively convey information to your
users without overwhelming them with detail.

Accessors (simple functions that return components of your object)
rather than direct slot access (using `@`) help to isolate the
implementation of your class from its interface. Generally `@` should
only be used in an accessor, all other code should use the
accessor. The accessor does not need to be exported from the class if
the user has no need or business accessing parts of your data
object. Plain-old-functions (rather than generic + method) are often
sufficient for accessors; it's often useful to employ (consistently) a
lightweight name mangling scheme (e.g., starting the accessor method
name with a 2 or 3 letter acronym for your package) to avoid name
collisions between similarly named functions in other packages.

The following layout is sometimes used to organize classes and
methods; other approaches are possible and acceptable.

* All class definitions in R/AllClasses.R
* All generic function definitions in R/AllGenerics.R
* Methods are defined in a file named by the generic function. For
 example, all `show` methods would go in R/show-methods.R.

A Collate: field in the DESCRIPTION file may be necessary to order
class and method definitions appropriately during package
installation.


### Function development {#function-development}

#### Functions Names {#rcode-function-names}

Function names should follow the following conventions:

* Use camelCase: initial lower case, then alternate case between words.
* Do not use '.' (in the S3 class system, `some(x)` where `x` is class `A` will dispatch to `some.A`).
* Prefix non-exported functions with a '.'.

#### Functional Programming and Length {#functional-programming-and-length}

Guiding principle: Smaller functions are easier to read, test, debug and reuse.

* Avoid large chunks of repeated code. If code is being repeated this is
generally a good indication a helper function could be implemented.

* Excessively long functions should also be avoided. Write small functions.

* It is best if each function has only one job that it needs to do. And it is
also best if that function does that job in as few lines of code as possible.
If you find yourself writing great long functions that extend for more than a
screen, then you should probably take a moment to split it up into smaller
helper functions.

* Nesting functions should be avoiding. It unnecessarily increases the main
 function length and makes the main function harder to read. Helper functions
 and internal functions should avoid being nested and include at the end of the
 file or as a seperate file (e.g. internal.R, helpers.R, utils.R)

#### Function arguments {#function-arguments}

* Argument names to functions should be descriptive and well documented.
* Arguments should generally have default values.
* Check arguments against a validity check or `stopifnot`

#### Variable names {#variable-names}

* Use camelCase: initial lowercase, then alternate case between words.

#### Additional files and dependencies {#rcode-sysdep}

Do NOT install anything on a users system! System dependencies, applications,
and additionally needed packages should be assumed already present on the user's
system.

Direct calls to external commands via
system() or system2() are not ideal so should only be used when there is no
other alternative. For example, if a CRAN or Bioconductor package already
provides the functionality that you are after, you should use that instead.

Now if your package **absolutely** must rely on external software then you
need to make sure that those requirements are listed in
the SystemRequirements field of the DESCRIPTION file of the package. These
requirements should be "reasonable" requirements, that is, trusted software
only, open source, and relatively easy to install.

Additionally we ask that the package contains an [INSTALL file](#sysdep) (in the
top-level folder) that provides instructions for installing the external
software on the 3 major OS that we support: Linux, Windows, and Mac. This
will not only help your users get the external software on their machines,
but it will also help us install it on the build machines if it's not
already there.

All system and package dependencies should be the latest publically available
version. All package dependencies must actively be on CRAN or
Bioconductor. Bioconductor will not recognize Remotes in DESCRIPTION and will
not install a lower version of a package or dependency.

#### Namespaces {#rcode-namespaces}

* Import all symbols used from packages other than "base". Except for
 default packages (base, graphics, stats, etc.) or when overly
 tedious, fully enumerate imports.
* Export all symbols useful to end users. Fully enumerate exports.


### Coding Style {#coding-style}

While it may seem arbitrary, being consistent with coding style helps other
understand, evaluate, and debug code easier. While these are optional, it is
highly encouraged.


#### Indentation

* Use 4 spaces for indenting. No tabs.
* No lines longer than 80 characters.


#### Use of space

* Always use space after a comma. This: `a, b, c`.
* No space around "=" when using named arguments to functions. This:
`somefunc(a=1, b=2)`
* Space around all binary operators: `a == b`.

#### Comments {#rcode-comments}

* Use "##" to start full-line comments.
* Indent at the same level as surrounding code.
* Comments should be for clarification, notes, and documentation only.
* Do not leave in commented out code chunks that are not utilized
* Commenting TODO's should be avoided in published package code

#### Additonal style and formatting references

*[formatR][] a package that assists with formatting.

*[Hadley Wickhams's R Style Guide](https://style.tidyverse.org/).

## R Code Best Practices and Guidelines

Many common coding and syntax issues are flagged in `R CMD check` and
`BiocCheck()` (see the `R CMD check`
[cheatsheet](http://r-pkgs.had.co.nz/check.html) and `r BiocStyle::Biocpkg("BiocCheck", vignette = "BiocCheck.html")` vignette. Every
effort should be made to clear up ERROR, WARNING, or NOTEs produced from these
checks.

### Code syntax and efficiency

* Use `vapply()` instead of `sapply()`, and use the various `apply` functions instead of `for` loops. See below section on vectorize.
* Use `seq_len()` or `seq_along()` instead of `1:...`. See below section on avoid `1:n` style iterations
* Use `TRUE` and `FALSE` instead of `T` and `F`.
* Use numeric indices at _lower_ level interfaces (e.g., internal subset ops) for computational efficiency.
* Use named indices at _higher_ level interfaces (e.g., function arguments) for robustness.
* Use `is()` instead of `class() ==` and `class() !=`.
* Use `system2()` instead of `system()`.
* Do not use `set.seed()` in any internal <iclass="fab fa-r-project"></i> code.
* Do not use `browser()` in any internal <iclass="fab fa-r-project"></i> code.
* Avoid the use of `<<-`.
* Avoid use of direct slot access with `@` or `slot()`. Accessor methods should be created and utilized
* Use the packages `r BiocStyle::Biocpkg("ExperimentHub")` and `r BiocStyle::Biocpkg("AnnotationHub")` instead of downloading external data from unsanctioned providers such as <iclass="fab fa-github"></i> GitHub, <i * class="fa fa-dropbox" aria-hidden="true"></i> Dropbox, etc. In general, data utlilized in packages should be downloaded from trusted public databases. See also section on web querying and file caching.
* Use `<-` instead of `=` for assigning variables except in function arguments.

### Cyclomatic Complexity

A metric developed by Thomas J. McCabe, cyclomatic complexity describes the
control-flow of a program. The higher the value, the more complex the code is
said to be.

In the `BiocCheck` example below, we have a series of control-flow statements
that check for multiple conditions and return a value if some of those
conditions are true. The function `hasValueSection` is checking that the
documentation contains a 'value' Rd tag i.e., a return section in the
documentation.

```r
hasValueSection<-function(manpage) {
rd<-tools::parse_Rd(manpage)
type<-BiocCheck:::docType(rd)
if (identical(type, "data"))
return(TRUE)
tags<-tools:::RdTags(rd)
if ("\\usage"%in%tags&& (!"\\value"%in%tags))
return(FALSE)
value<-NULL
if ("\\value"%in%tags)
value<-rd[grep("\\value", tags)]
if ("\\usage"%in%tags&& (!"\\value"%in%tags)) {
values<- paste(unlist(value), collapse='')
test<- (is.list(value[[1]]) && length(value[[1]]) ==0) ||
 nchar(gsub("", "", values)) ==0
if (test)
return(FALSE)
 }
TRUE
}
```

As you can see, the code here is quite complex, creating `if` statements for
specific conditions. The measured cyclomatic complexity as given by the
`cyclocomp` package is a value of 16.

```r
library(cyclocomp)
cyclocomp(hasValueSection)
#> [1] 16
```

Let's re-write the function to reduce the complexity and use a base character
vector representation.

```r
hasValueSection2<-function(manpage) {
rd<-tools::parse_Rd(manpage)
tags<-tools:::RdTags(rd)
value<-rd[grepl("\\value", tags)]
value<- unlist(value, recursive=FALSE)
value<- Filter(function(x) attr(x, "Rd_tag") !="COMMENT", value)
values<- paste(value, collapse='')
 nzchar(trimws(values)) && length(value)
}
```

By internalizing a base character vector representation in the code, the
successive functions will operate on that representation. This gives us code
that is less complex and easier to understand and maintain with a complexity
metric value of 2.

```r
cyclocomp(hasValueSection2)
#> [1] 2
```

Note. Switches based on `docType` should be outside of the function as a filter
for the `manpage` input instead.

#### End-User messages

Use the functions `message()`, `warning()` and `error()`, instead of the
`cat()` function (except for customized `show()` methods). `paste0()` should
generally not be used in these methods except for collapsing multiple values
from a variable.

*`message()` communicates diagnostic messages (e.g., progress during
 lengthy computations) during code evaluation.
*`warning()` communicates unusual situations handled by your code.
*`stop()` indicates an error condition.
*`cat()` or `print()` are used only when displaying an object to the user in a `show` method.

#### Graphic Device

Use `dev.new()` to start a graphics drive if necessary. Avoid using `x11()`
or `X11()`, for it can only be called on machines that have access to an X
server.


#### Web Querying and File caching

Files downloaded should be cached.
Please use `r BiocStyle::Biocpkg("BiocFileCache")`.
If a maintainer creates their own caching directory, it should utilize standard
caching directories `tools::R_user_dir(package, which="cache")`. It is not
allowed to download or write any files to a users home directory, working
directory, or installed package directory. Files should be cached as stated
above with `BiocFileCache` (preferred) or `R_user_dir` or `tempdir()/tempfile()`
if files should not be persistent.

Please also follow guiding principles in Appendix section [Querying Web
Resources](#querying-web-resources), if applicable.



## Robust and Efficient R Code

_R_ can be a robust, fast and efficient programming language, but some
coding practices can be very unfortunate. Here are some suggestions.

### Guiding Principles

1. The primary principle is to make sure your code is **correct**. Use
`identical()` or `all.equal()` to ensure correctness, and
[unit tests][] to ensure consistent results across code revisions.

2. Write robust code. Avoid efficiencies that do not easily handle
 edge cases such as 0 length or `NA` values.

3. Know when to stop trying to be efficient. If the code takes a
 fraction of a second to evaluate, there is no sense in trying for
 further improvement. Use `system.time()` or a package like
[microbenchmark][] to quantify performance gains.

### Reuse Existing Functionality and Classes

Emphasized again for good measure! Reuse existing import/export methods,
functionality, and classes whenever possible.

### Vectorize

Many R operations are performed on the whole object, not just the elements of
the object (e.g., `sum(x)` instead of `x[1] + x[2] + x[2] + ...`). In
particular, relatively few situations require an explicit `for` loop.

Vectorize, rather than iterate (`for` loops, `lapply()`, `apply()` are
common iteration idioms in _R_). A single call `y <- sqrt(x)` with a
vector `x` of length `n` is an example of a vectorized function. A
call such as `y <- sapply(x, sqrt)` or a `for` loop `for (i in
seq_along(x)) y[i] <- sqrt(x[i])` is an iterative version of the same
call, and should be avoided. Often, iterative calculations that can be
vectorized are "hidden" in the body of a `for` loop

for (i in seq_len(n)) {
 ## ...
 tmp <- foo(x[i])
 y <- tmp + ## ...
}

and can be 'hoisted' out of the loop

tmp <- foo(x)
for (i in seq_len(n)) {
 ## ...
 y <- tmp[i] + ##
}

Often this principle can be applied repeatedly, and an iterative
`for` loop becomes a few lines of vectorized function calls.

### 'Pre-allocate and fill' if iterations are necessary

Preallocate-and-fill (usually via `lapply()` or `vapply()`) rather
than copy-and-append. If creating a vector or list of results, use
`lapply()` (to create a list) or `vapply()` (to create a vector)
rather than a `for` loop. For instance,

n <- 10000
x <- vapply(seq_len(n), function(i) {
 ## ...
}, integer(1))

manages the memory allocation of `x` and compactly represents the
transformation being performed. A `for` loop might be appropriate if
the iteration has side effects (e.g., displaying a plot) or where
calculation of one value depends on a previous value. When creating a
vector in a `for` loop, always pre-allocate the result

x <- integer(n)
if (n > 0) x[1] <- 0
for (i in seq_len(n - 1)) {
 ## x[i + 1] <- ...
}

**Never** adopt a strategy of 'copy-and-append'

not_this <- function(n) {
 x <- integer()
 for (i in seq_len(n))
 x[i] = i
 x
}

This pattern copies the current value of `x` each time through the
loop, making `n^2 / 2` total copies, and scale very poorly even for
trivial computations:

> system.time(not_this(1000)
 user system elapsed
 0.004 0.000 0.004
> system.time(not_this(10000))
 user system elapsed
 0.169 0.000 0.168
> system.time(not_this(100000))
 user system elapsed
 22.827 1.120 23.936

### Avoid `1:n` style iterations

Write `seq_len(n)` or `seq_along(x)` rather than `1:n` or
`1:length(x)`. This protects against the case when `n` or `length(x)`
is 0 (which often occurs as an unexpected 'edge case' in real code) or
negative.


### Parallel Recommendations

We recommend using `r BiocStyle::Biocpkg("BiocParallel")`. It provides a
consistent interface to the user and supports the major parallel computing
styles: forks and processes on a single computer, ad hoc clusters,
batch schedulers and cloud computing. By default, `BiocParallel`
chooses a parallel back-end appropriate for the OS and is supported
across Unix, Mac and Windows. Coding requirements for `BiocParallel`
are:

- Use `lapply()`-style iteration instead of explicit for loops.
- The `FUN` argument to `bplapply()` must be a self-contained
 function; all symbols used in the function are from default R
 packages, from packages `require()`'ed in the function, or passed in
 as arguments.
- Allow the user to specify the BiocParallel back-end. Do this by
 invoking `bplapply()`_without_ specifying `BPPARAM`; the user can
 then override the default choice with `BiocParallel::register()`.

For more information see the [BiocParallel vignette][].

When implementing in package development, a minimal number of cores (1 or 2)
should be set as a default.