Engineering Physics (Mechanical Engineering) - Bachelor of Science in Engineering Physics
A strong grasp of underlying physical principles behind the development of new technologies is necessary to keep up with new developments in a high-tech world. The Bachelor of Science (B.S.) in Engineering Physics program is designed to provide quality education to students for immediate employment with technical jobs in private industries (especially high-tech industries), research laboratories and public sectors. The program trains students with a combination of engineering knowledge, physics principles, mathematical background, problem-solving strategies and effective communication skills. The B.S. in Engineering Physics also provides an excellent preparation for graduate studies in either physics or an engineering discipline.
The requirements for the Mechanical concentration are listed below. Students must earn a C- or better in all required courses.
Students must complete all University degree requirements, which include: General Education requirements, Viewing a Wider World requirements, and elective credits to total at least 120 credits with 48 credits in courses numbered 300 or above. Developmental coursework will not count towards the degree requirements and/or elective credits, but may be needed in order to take the necessary English and Mathematics coursework.
| Prefix | Title | Credits |
|---|---|---|
| General Education | ||
| Area I: Communications | ||
| English Composition - Level 1 | ||
| ENGL 1110G | Composition I | 4 |
| English Composition - Level 21 | 3 | |
| Oral Communication1 | 3 | |
| Area II: Mathematics | ||
| MATH 1511G | Calculus and Analytic Geometry I 2 | 4 |
| Area III/IV: Laboratory Sciences and Social/Behavioral Sciences | 11 | |
Select one seuqence from the following for four credits: | ||
| Calculus -Based Physics I and Calculus -Based Physics I Lab | 4 | |
| Mechanics and Experimental Mechanics3 | 4 | |
Select one seuqence from the following for four credits: | ||
| Calculus -Based Physics II and Calculus -Based Physics II Lab | 4 | |
| Electricity and Magnetism and Electricity & Magnetism Laboratory3 | 4 | |
Area IV: Social and Behavioral Sciences (3 credits)1 | ||
| Area V: Humanities1 | 3 | |
| Area VI: Creative and Fine Arts1 | 3 | |
| General Education Elective | ||
| MATH 1521G | Calculus and Analytic Geometry II | 4 |
| or MATH 1521H | Calculus and Analytic Geometry II Honors | |
| Viewing A Wider World | ||
| Viewing a Wider World Electives4 | 6 | |
| Departmental/College Requirements | ||
| Program Specific Requirements | ||
| Mathematics | ||
| MATH 2530G | Calculus III | 3 |
| MATH 3160 | Introduction to Ordinary Differential Equations | 3 |
| Natural Science | ||
| CHEM 1215G | General Chemistry I Lecture and Laboratory for STEM Majors | 4 |
| Electives | ||
| Technical Elective5 | 3 | |
| Physics | ||
| PHYS 2120 & 2120L | Heat, Light, and Sound and Heat, Light, and Sound Laboratory | 4 |
| PHYS 395 | Intermediate Mathematical Methods of Physics | 3 |
| PHYS 451 | Intermediate Mechanics I | 3 |
| PHYS 454 | Intermediate Modern Physics I | 3 |
| PHYS 455 | Intermediate Modern Physics II | 3 |
| Physics with Engineering Component | ||
| PHYS 315 | Modern Physics | 3 |
| PHYS 325 | Intermediate Experimental Physics | 3 |
| PHYS 461 | Intermediate Electricity and Magnetism I | 3 |
| PHYS 462 | Intermediate Electricity and Magnetism II | 3 |
| Engineering | ||
| C E 301 | Mechanics of Materials | 3 |
| M E 240 | Thermodynamics | 3 |
| M E 261 | Numerical Methods | 3 |
| M E 326 | Mechanical Design | 3 |
| M E 338 | Fluid Mechanics | 3 |
| M E 341 | Heat Transfer | 3 |
| M E 425 | Design of Machine Elements | 3 |
| ENGR 110 | Introduction to Engineering Design | 3 |
| ENGR 233 | Engineering Mechanics I | 3 |
| ENGR 234 | Engineering Mechanics II | 3 |
| ENGR 401 | Engineering Capstone I | 3 |
| ENGR 402 | Engineering Capstone II | 3 |
| Second Language: (not required) | ||
| Electives, to bring the total credits to 120 | 2 | |
| Total Credits | 120 | |
- 1
See the General Education section of the catalog for a full list of courses.
- 2
MATH 1511G Calculus and Analytic Geometry I is required for the degree but students may need to take any prerequisites needed to enter MATH 1511G Calculus and Analytic Geometry I first.
- 3
PHYS 2110 Mechanics/PHYS 2110L Experimental Mechanics and PHYS 2140 Electricity and Magnetism/PHYS 2140L Electricity & Magnetism Laboratory will not automatically count towards the Area III: Laboratory Science requirement, an exception will be made if students elect to take these courses.
- 4
See the Viewing a Wider World section of the catalog for a full list of courses. See Alternatives for meeting VWW requirements (nine-credit rule).
- 5
Approved technical electives are decided by Engineering Physics Advisors.
A Suggested Plan of Study for Students
This roadmap assumes student placement in MATH 1511G Calculus and Analytic Geometry I and ENGL 1110G Composition I. The contents and order of this roadmap may vary depending on initial student placement in mathematics and English. It is only a suggested plan of study for students and is not intended as a contract. Course availability may vary from fall to spring semester and may be subject to modification or change. Full-time students are usually required to take at least 15 credits per semester. This requirement could be satisfied for example by taking a one-credit supplemental instruction course.
| First Year | ||
|---|---|---|
| Semester 1 | Credits | |
| MATH 1511G | Calculus and Analytic Geometry I 1 | 4 |
| ENGL 1110G | Composition I 1 | 4 |
| PHYS 2110 & 2110L | Mechanics and Experimental Mechanics1,2 | 4 |
| ENGR 110 | Introduction to Engineering Design | 3 |
| Credits | 15 | |
| Semester 2 | ||
| MATH 1521G or MATH 1521H | Calculus and Analytic Geometry II 1 or Calculus and Analytic Geometry II Honors | 4 |
| CHEM 1215G | General Chemistry I Lecture and Laboratory for STEM Majors 1 | 4 |
| PHYS 2140 & 2140L | Electricity and Magnetism and Electricity & Magnetism Laboratory1,2 | 4 |
| M E 240 | Thermodynamics 1 | 3 |
| Credits | 15 | |
| Second Year | ||
| Semester 1 | ||
| MATH 2530G | Calculus III 1 | 3 |
| ENGL 2210G | Professional and Technical Communication Honors 1 | 3 |
| PHYS 2120 & 2120L | Heat, Light, and Sound and Heat, Light, and Sound Laboratory1 | 4 |
| ENGR 233 | Engineering Mechanics I | 3 |
| Area IV: Social and Behavioral Science Course3 | 3 | |
| Credits | 16 | |
| Semester 2 | ||
| MATH 3160 | Introduction to Ordinary Differential Equations 1 | 3 |
| C E 301 | Mechanics of Materials 1 | 3 |
| PHYS 315 | Modern Physics 1 | 3 |
| PHYS 325 | Intermediate Experimental Physics | 3 |
| ENGR 234 | Engineering Mechanics II | 3 |
| Credits | 15 | |
| Third Year | ||
| Semester 1 | ||
| PHYS 395 | Intermediate Mathematical Methods of Physics 1 | 3 |
| PHYS 454 | Intermediate Modern Physics I | 3 |
| M E 261 | Numerical Methods | 3 |
| M E 326 | Mechanical Design 1 | 3 |
| M E 338 | Fluid Mechanics 1 | 3 |
| Credits | 15 | |
| Semester 2 | ||
| PHYS 455 | Intermediate Modern Physics II | 3 |
| M E 425 | Design of Machine Elements 1 | 3 |
| Area V: Humanities Course3 | 3 | |
| VWW: Viewing a Wider World Course4 | 3 | |
| VWW: Viewing a Wider World Course4 | 3 | |
| Credits | 15 | |
| Fourth Year | ||
| Semester 1 | ||
| PHYS 451 | Intermediate Mechanics I 1 | 3 |
| PHYS 461 | Intermediate Electricity and Magnetism I | 3 |
| ENGR 401 | Engineering Capstone I | 3 |
| COMM 1115G | Introduction to Communication | 3 |
| Area VI: Creative and Fine Arts Course3 | 3 | |
| Credits | 15 | |
| Semester 2 | ||
| PHYS 462 | Intermediate Electricity and Magnetism II | 3 |
| M E 341 | Heat Transfer | 3 |
| ENGR 402 | Engineering Capstone II 1 | 3 |
| Technical Elective Course5 | 3 | |
| Elective Course | 2 | |
| Credits | 14 | |
| Total Credits | 120 | |
- 1
These courses may have prerequisites and/or co-requisites, and it is the students responsibility for checking and fulfilling all those requirements
- 2
PHYS 2110 Mechanics/PHYS 2110L Experimental Mechanics and PHYS 2140 Electricity and Magnetism/PHYS 2140L Electricity & Magnetism Laboratory will not automatically count towards the Area III: Laboratory Science requirement, an exception will be made if students elect to take these courses.
- 3
See the General Education section of the catalog for a full list of courses.
- 4
See the Viewing a Wider World section of the catalog for a full list of courses.
- 5
Technical electives are approved by Engineering Physics advisors
